Rule Non-Automatic 12 Volt Bilge Pump With 1-1/8'' Discharge

US$139.97
Item number: sku:RUL-02.1

Rule Non-Automatic 12 Volt Bilge Pump With 1-1/8'' Discharge

The Rule Non-Automatic 12 Volt Bilge Pump With 1-1/8'' Discharge features a high pumping capacity and reliability at a lower cost. Containing more exclusive design features than any comparable competitive pump. The bilge pumps are usually operated via a float switch or another level-sensing device with outputs between 1500 GPH to 4000 GPH. The Rule-10 2000 GPH is a high capacity submersible bilge pump that is typically installed with a three way switch to offer both automatic and manual override capabilities.

This pump is completely submersible and has a tough plastic body. The pump features back flow prevention to reduce the amount of water left over in the bilge. This reduces the odor and helps keep the bilge cleaner. Hidden air vents within the body help prevent air locking in challenging plumbing situations and helps with the check valve. The threaded discharge provides easier installation and easier maintenance, while e the snap-lock strainer base allows for easier cleaning. This pump also features a built in thermal cut-off which provides added protection to the pump and vessel.

Features:

  • Ignition protected
  • Long-life motor
  • Completely submersible
  • Rust and corrosion protected
  • Silent operation
  • Stainless steel shafts
  • Easy-clean
  • Back flow prevention
  • Marine-grade blocked wiring
  • Thermal cut-off
  • Threaded discharge
  • No burn-out when dry

RUL-02 1500 GPH Specs:

  • Capacity: 1500 GPH
  • Volts: 12 DC
  • Amp draw @ 12 V: 4 amp
  • Amp draw @ 13.6 V: 4.8 amp
  • Fuse Size: 10 (Amp)
  • Height: 6"
  • Width: 4.25"
  • Port type: 1-1/8" hose barb
  • Replacement strainer: Model 278
  • Panel switches: 41, 43, 45, 49
  • Float switches: 35A, 37A, 40A

RUL-10 2000 GPH Specs:

  • Capacity: 2000 GPH
  • Volts: 12 DC
  • Fuse size: 15
  • Amps @ 12 V: 7.3
  • Amps @ 13.6 V: 8.6
  • Height: 6"
  • Width: 4.25"
  • Replacement strainer: Model 278
  • Panel Switches: 41, 43, 45, 49
  • Float Switches: 35A, 37A, 40A